NTV Channel Frequency
NTV Frequency TP Free to Air
N TV Satellite SES 7 108.2°E LNB Type KU Band
NTV Satellite SES 7 108.2°E LNB Type KU Band Updated 13-11-2026
Channel Name |
Frequency |
Polarity |
Symbol Rate |
FEC |
NTV |
11600 |
V |
30000 |
5/6 |
NTV Satellite SES 7 108.2°E LNB Type KU Band Updated 13-11-2026
NTV Satellite G-Sat 10 83.0°E LNB Type KU Band Updated 13-11-2026
Channel Name |
Frequency |
Polarity |
Symbol Rate |
FEC |
NTV |
11590 |
V |
32720 |
2/3 |
NTV Satellite G-Sat 10 83.0°E LNB Type KU Band Updated 13-11-2026
NTV Satellite G-Sat 10 83.0°E LNB Type C Band Updated 13-11-2026
Channel Name |
Frequency |
Polarity |
Symbol Rate |
FEC |
NTV |
3898 |
H |
6800 |
3/4 |
NTV Satellite G-Sat 10 83.0°E LNB Type C Band Updated 13-11-2026
NTV Satellite G-Sat 10 83.0°E LNB Type KU Band Updated 13-11-2026
Channel Name |
Frequency |
Polarity |
Symbol Rate |
FEC |
NTV |
11130 |
H |
32720 |
3/4 |
NTV Satellite G-Sat 10 83.0°E LNB Type KU Band Updated 13-11-2026
The table for NTV Channel includes NTV at 11600 MHz, polarity V, with symbol rate 30000. Read the satellite and access notes alongside that row before entering the settings. The numbers describe one listed carrier and may be shared by several services.
When a receiver shows several versions of the same name, compare the satellite, provider and service information on each result. Standard-definition, HD and regional feeds may be separate services. Keep the existing entry until you have confirmed which version is available, and use the access note to determine whether a subscription is required.
Start with the relevant row in the table. Match the frequency, polarity and symbol rate together and check that your receiver is on the satellite named with the entry.
Check whether the receiver actually has signal quality and carrier lock. If it does, verify that the service is still in the scanned package and that the receiver supports its video format and access requirements.
Reception depends on the satellite beam and the dish setup at your location. Compare the listed beam with your region, and use a known active transponder on the same satellite to check reception.