Class TV Moda Satellite Frequency Reference
Class TV Moda is listed on Hotbird at 13°E, 10930 MHz horizontal, with a symbol rate of 30000 and FEC 2/3.
Satellite tuning settings
| Satellite | Frequency (MHz) | Polarity | Symbol rate (kS/s) | FEC | System | Access or package |
|---|---|---|---|---|---|---|
| Hotbird 13°E | 10930 | H | 30000 | 2/3 | DVB-S2 / 8PSK | Free-to-air |
Sources and current listings — Frocus
Earlier listings and receiver reference
These saved entries may have changed. Check the provider or a current satellite directory before using them.
Class TV Channel Moda
Class TV Moda Satellite Hotbird 13C 13.0°E LNB Type KU Band
Channel Name |
Frequency |
Polarity |
Symbol Rate |
FEC |
|---|---|---|---|---|
Class TV Moda |
10930 |
H |
30000 |
2/3 |
Class TV Moda Satellite Hotbird 13C 13.0°E LNB Type KU Band
Servus TVOsterreich
TVE InternacionalEuropa
How to use the service reference
The table for Class TV Moda Satellite Frequency Reference includes Hotbird 13°E at 10930 MHz, polarity H, with symbol rate 30000. Read the satellite and access notes alongside that row before entering the settings. The numbers describe one listed carrier and may be shared by several services.
When a receiver shows several versions of the same name, compare the satellite, provider and service information on each result. Standard-definition, HD and regional feeds may be separate services. Keep the existing entry until you have confirmed which version is available, and use the access note to determine whether a subscription is required.
Checking the receiver result
A signal strength reading can indicate that the receiver sees power or energy at its input. Signal quality is the more useful reading for confirming that it can lock to the selected carrier. If quality stays at zero, check the satellite selection, the LNB settings and the switch port. If several known active carriers also fail, inspect alignment and cabling before changing individual channel entries.
After the receiver locks, run a manual transponder scan and review the results by service name. Check the scan filter if the expected service is missing. A free-to-air-only filter can exclude encrypted services from the results. Save a working channel only after confirming that it matches the intended service, especially if the receiver already holds several similarly named entries.
Frequently asked questions
Which settings should I use for Class TV Moda Satellite Frequency Reference?
Start with the relevant row in the table. Match the frequency, polarity and symbol rate together and check that your receiver is on the satellite named with the entry.
Why does a scan show signal but no picture?
Check whether the receiver actually has signal quality and carrier lock. If it does, verify that the service is still in the scanned package and that the receiver supports its video format and access requirements.
Will the same settings work in every location?
Reception depends on the satellite beam and the dish setup at your location. Compare the listed beam with your region, and use a known active transponder on the same satellite to check reception.