Satellite reference

Joy Prime

Joy Prime Channel Frequency

Joy Prime Frequency TP Free to Air

Joy Prime Astra 2F Satellite 28.2°East LNB Type KU Band and C Band

Joy-Prime-Frequency

Joy Prime Frequency Eutelsat 36B

Joy Prime on Eutelsat 36B Satellite 35.9°E LNB Type KU Band Updated 13-11-2026

Channel Name

Frequency

Polarity

Symbol Rate

FEC

Joy Prime

12073

V

27500

3/4

Joy Prime on Eutelsat 36B Satellite 35.9°E LNB Type KU Band Updated 13-11-2026

Joy Prime Frequency Astra 2F

Joy Prime on Astra 2F Satellite 28.2°E LNB Type KU Band Updated 13-11-2026

Channel Name

Frequency

Polarity

Symbol Rate

FEC

Joy Prime

12525

V

30000

5/6

Joy Prime on Astra 2F Satellite 28.2°E LNB Type KU Band Updated 13-11-2026

Joy Prime Frequency SES 5

Joy Prime on SES 5 Satellite 5.0°E LNB Type KU Band Updated 13-11-2026

Channel Name

Frequency

Polarity

Symbol Rate

FEC

Joy Prime

11766

V

27500

3/4

Joy Prime on SES 5 Satellite 5.0°E LNB Type KU Band Updated 13-11-2026

Joy Prime Frequency Intelsat 37E

Joy Prime on Intelsat 37E Satellite 18.0°W LNB Type C Band Updated 13-11-2026

Channel Name

Frequency

Polarity

Symbol Rate

FEC

Joy Prime

4032

R

9037

5/6

Joy Prime on Intelsat 37E Satellite 18.0°W LNB Type C Band Updated 13-11-2026

Joy Prime Satellite

Satellite TV List free satellite TV

Satellite degree position All sat Frequency Strong TP

Satellite Channel List free satellite channel

Al-Yah-1 Satellite AL Yahsat 1 Frequency 52.5° East Channels List with full guide Yahsat List TV Channels Frequency Strong TP dish antenna setting

Hotbird Satellite Hotbird 13° East Strong TP Frequency for Dish antenna settings TV Channels frequencies List LNB Type KU band HotBird 13.0° East

Galaxy-19 Satellite 97.0°W Strong TP Frequency for Dish antenna settings Channels list frequencies LNB C band and KU band

How to use the listing reference

The table for Joy Prime includes Joy Prime at 12073 MHz, polarity V, with symbol rate 27500. Read the satellite and access notes alongside that row before entering the settings. The numbers describe one listed carrier and may be shared by several services.

When a receiver shows several versions of the same name, compare the satellite, provider and service information on each result. Standard-definition, HD and regional feeds may be separate services. Keep the existing entry until you have confirmed which version is available, and use the access note to determine whether a subscription is required.

Checking the receiver result

A signal strength reading can indicate that the receiver sees power or energy at its input. Signal quality is the more useful reading for confirming that it can lock to the selected carrier. If quality stays at zero, check the satellite selection, the LNB settings and the switch port. If several known active carriers also fail, inspect alignment and cabling before changing individual channel entries.

After the receiver locks, run a manual transponder scan and review the results by service name. Check the scan filter if the expected service is missing. A free-to-air-only filter can exclude encrypted services from the results. Save a working channel only after confirming that it matches the intended service, especially if the receiver already holds several similarly named entries.

Frequently asked questions

Which settings should I use for Joy Prime?

Start with the relevant row in the table. Match the frequency, polarity and symbol rate together and check that your receiver is on the satellite named with the entry.

Why does a scan show signal but no picture?

Check whether the receiver actually has signal quality and carrier lock. If it does, verify that the service is still in the scanned package and that the receiver supports its video format and access requirements.

Will the same settings work in every location?

Reception depends on the satellite beam and the dish setup at your location. Compare the listed beam with your region, and use a known active transponder on the same satellite to check reception.