Satellite reference

Peace TV Urdu Channel

Peace TV Urdu Channels Frequency

Peace TV Urdu Frequency TP Free to Air

Peace TV Urdu Intelsat 20 Satellite 68.5°E LNB Type KU Band

Peace-Tv-Frequency

Peace TV Urdu  Intelsat 20

Peace TV Urdu Intelsat 20  Satellite 68.5°E LNB Type C Band Updated 13-11-2026


Channel Name

Frequency

Polarity

Symbol Rate

FEC

Intelsat 20

4150

H

14400

3/4

Peace TV Urdu Intelsat 20  Satellite 68.5°E LNB Type C Band Updated 13-11-2026

Peace TV Urdu Paksat 1R

Peace TV Urdu Paksat 1R Satellite 38.0°E LNB Type C Band Updated 13-11-2026


Channel Name

Frequency

Polarity

Symbol Rate

FEC

Paksat 1R

4060

V

5000

3/4

Peace TV Urdu Paksat 1R Satellite 38.0°E LNB Type C Band Updated 13-11-2026

How to use the service reference

The table for Peace TV Urdu Channel includes Intelsat 20 at 4150 MHz, polarity H, with symbol rate 14400. Read the satellite and access notes alongside that row before entering the settings. The numbers describe one listed carrier and may be shared by several services.

When a receiver shows several versions of the same name, compare the satellite, provider and service information on each result. Standard-definition, HD and regional feeds may be separate services. Keep the existing entry until you have confirmed which version is available, and use the access note to determine whether a subscription is required.

Checking the receiver result

A signal strength reading can indicate that the receiver sees power or energy at its input. Signal quality is the more useful reading for confirming that it can lock to the selected carrier. If quality stays at zero, check the satellite selection, the LNB settings and the switch port. If several known active carriers also fail, inspect alignment and cabling before changing individual channel entries.

After the receiver locks, run a manual transponder scan and review the results by service name. Check the scan filter if the expected service is missing. A free-to-air-only filter can exclude encrypted services from the results. Save a working channel only after confirming that it matches the intended service, especially if the receiver already holds several similarly named entries.

Frequently asked questions

Which settings should I use for Peace TV Urdu Channel?

Start with the relevant row in the table. Match the frequency, polarity and symbol rate together and check that your receiver is on the satellite named with the entry.

Why does a scan show signal but no picture?

Check whether the receiver actually has signal quality and carrier lock. If it does, verify that the service is still in the scanned package and that the receiver supports its video format and access requirements.

Will the same settings work in every location?

Reception depends on the satellite beam and the dish setup at your location. Compare the listed beam with your region, and use a known active transponder on the same satellite to check reception.