Satellite reference

Evil Angel TV

Evil Angel TV Channel Frequency

Evil Angel TV Frequency TP Free to Air

Sport Klub Hellas Sat 3 Satellite 39.0°East LNB Type KU Band

Evil-Angel-TV-Frequency

Evil Angel TV Frequency Hellas Sat 3

Evil Angel TV on Hellas Sat 3 Satellite 39.0°E LNB Type KU Band Updated 13-11-2026

Channel Name

Frequency

Polarity

Symbol Rate

FEC

Evil Angel TV

12524

H

30000

7/8

Evil Angel TV on Hellas Sat 3 Satellite 39.0°E LNB Type KU Band Updated 13-11-2026

Evil Angel TV Frequency Eutelsat 16A

Evil Angel TV on Eutelsat 16A Satellite 16.0°E LNB Type KU Band Updated 13-11-2026

Channel Name

Frequency

Polarity

Symbol Rate

FEC

Evil Angel TV

11595

V

30000

5/6

Evil Angel TV on Eutelsat 16A Satellite 16.0°E LNB Type KU Band Updated 13-11-2026

Evil Angel TV Frequency BulgariaSat 1

Evil Angel TV on BulgariaSat 1 Satellite 1.9°E LNB Type KU Band Updated 13-11-2026

Channel Name

Frequency

Polarity

Symbol Rate

FEC

Evil Angel TV

12226

V

30000

2/3

Evil Angel TV on BulgariaSat 1 Satellite 1.9°E LNB Type KU Band Updated 13-11-2026

Evil Angel TV Satellite

Al-Yah-1 Satellite AL Yahsat 1 Frequency 52.5° East Channels List with full guide Yahsat List TV Channels Frequency Strong TP dish antenna setting

Hotbird Satellite Hotbird 13° East Strong TP Frequency for Dish antenna settings TV Channels frequencies List LNB Type KU band HotBird 13.0° East

Galaxy-19 Satellite 97.0°W Strong TP Frequency for Dish antenna settings Channels list frequencies LNB C band and KU band

How to use the service reference

The table for Evil Angel TV includes Evil Angel TV at 12524 MHz, polarity H, with symbol rate 30000. Read the satellite and access notes alongside that row before entering the settings. The numbers describe one listed carrier and may be shared by several services.

When a receiver shows several versions of the same name, compare the satellite, provider and service information on each result. Standard-definition, HD and regional feeds may be separate services. Keep the existing entry until you have confirmed which version is available, and use the access note to determine whether a subscription is required.

Checking the receiver result

A signal strength reading can indicate that the receiver sees power or energy at its input. Signal quality is the more useful reading for confirming that it can lock to the selected carrier. If quality stays at zero, check the satellite selection, the LNB settings and the switch port. If several known active carriers also fail, inspect alignment and cabling before changing individual channel entries.

After the receiver locks, run a manual transponder scan and review the results by service name. Check the scan filter if the expected service is missing. A free-to-air-only filter can exclude encrypted services from the results. Save a working channel only after confirming that it matches the intended service, especially if the receiver already holds several similarly named entries.

Frequently asked questions

Which settings should I use for Evil Angel TV?

Start with the relevant row in the table. Match the frequency, polarity and symbol rate together and check that your receiver is on the satellite named with the entry.

Why does a scan show signal but no picture?

Check whether the receiver actually has signal quality and carrier lock. If it does, verify that the service is still in the scanned package and that the receiver supports its video format and access requirements.

Will the same settings work in every location?

Reception depends on the satellite beam and the dish setup at your location. Compare the listed beam with your region, and use a known active transponder on the same satellite to check reception.