Satellite reference

ERI TV 1 Channel

ERI TV 1 Channels Frequency

ERI TV 1 Frequency TP Free to Air

p lass=text-justify">ERI TV 1 G-Sat 15 Satellite 152.0°East LNB Type C Band

Eri-TV-1-Frequency

ERI TV 1G-Sat 15

ERI TV 1 Optus D2 Satellite 152.0°E LNB Type KU Band Updated 13-11-2026

Channel Name

Frequency

Polarity

Symbol Rate

FEC

ERI TV 1

12546

V

22500

3/4

ERI TV 1 Optus D2 Satellite 152.0°E LNB Type KU Band Updated 13-11-2026

ERI TV 1 NSS 12

Channel Name

Frequency

< align="center">Polarity

Symbol Rate

FEC

ERI TV 1

11605

H

45000

5/6

ERI TV 1 Badr4ERI TV 1 Badr 4 Satellite 26.0°E LNB Type KU Band Updated 13-11-2026

Channel Name

Frequency

Polarity

Symbol Rate

FEC

ERI TV 1

11938

V

27500

5/6

ERI TV 1 Bad 4 Sallite 26.0°E LNB Type KU Band Updated 13-11-2026

ERI TV 1 rbsa C/h2>

ERI TV 1 absaC Satellite 20.0°E LNB Type K Band Updated 13-11-2026


Channel Name

Frequency

Polarity

Symbol Rate

FEC

ERI TV 1

3884

R

27500

5/6

ERI TV 1 SES5ERI TV 1 SES 5 Satellite 5.0°E LNB Type KU Band Updated 13-11-2026

Channel Name

Frequency

Polarity

Symbol Rate

FEC

ERI TV 1

11766

H

27500

3/4

ERI TV 1 SES 5 Satellite 5.0°E LNB Type KU Band Updated 13-11-2026

ERI TV 1 Nilesat 201

ERI TV 1 Nilesat 201 Satellite 7.0°E LNB Type KU Band Updated 13-11-2026

Channel Name

Frequency

Polarity

Symbol Rate

FEC

ERI TV 1

11747

V

27500

5/6

ERI TV 1 Nilesat 201 Satellite 7.0°E LNB Type KU Band Updated 13-11-2026

ERI TV 1 Eutelsat 8 West B

ERI TV 1 Eutelsat 8 West B Satellite 8.0°E LNB Type KU Band Updated 13-11-2026

Channel Name

Frequency

Polarity

Symbol Rate

FEC

ERI TV 1

11137

V

27500

3/4

ERI TV 1 Eutelsat 8 West B Satellite 8.0°E LNB Type KU Band Updated 13-11-2026

How to use the service reference

The table for ERI TV 1 Channel includes ERI TV 1 at 12546 MHz, polarity V, with symbol rate 22500. Read the satellite and access notes alongside that row before entering the settings. The numbers describe one listed carrier and may be shared by several services.

When a receiver shows several versions of the same name, compare the satellite, provider and service information on each result. Standard-definition, HD and regional feeds may be separate services. Keep the existing entry until you have confirmed which version is available, and use the access note to determine whether a subscription is required.

Checking the receiver result

A signal strength reading can indicate that the receiver sees power or energy at its input. Signal quality is the more useful reading for confirming that it can lock to the selected carrier. If quality stays at zero, check the satellite selection, the LNB settings and the switch port. If several known active carriers also fail, inspect alignment and cabling before changing individual channel entries.

After the receiver locks, run a manual transponder scan and review the results by service name. Check the scan filter if the expected service is missing. A free-to-air-only filter can exclude encrypted services from the results. Save a working channel only after confirming that it matches the intended service, especially if the receiver already holds several similarly named entries.

Frequently asked questions

Which settings should I use for ERI TV 1 Channel?

Start with the relevant row in the table. Match the frequency, polarity and symbol rate together and check that your receiver is on the satellite named with the entry.

Why does a scan show signal but no picture?

Check whether the receiver actually has signal quality and carrier lock. If it does, verify that the service is still in the scanned package and that the receiver supports its video format and access requirements.

Will the same settings work in every location?

Reception depends on the satellite beam and the dish setup at your location. Compare the listed beam with your region, and use a known active transponder on the same satellite to check reception.