Satellite reference

De Película Plus

De Película Plus Channels Frequency

De Película Plus Frequency TP Free to Air

De Película Plus Channel Eutelsat 117 West A Satellite 116.8°W LNB Type KU Band

De-Pelicula-Plus-Frequency

De Película Plus

De Película Plus Channel Eutelsat 117 West A Satellite 116.8°W LNB Type KU Band Updated 13-11-2026


Channel Name

Frequency

Polarity

Symbol Rate

Video Format

De Película Plus

4100

H

-

-

De Película Plus Channel Eutelsat 117 West A Satellite 116.8°W LNB Type KU Band Updated 13-11-2026

How to use the listing reference

Use this page to identify De Película Plus and check which details are available before you change receiver settings. Where a confirmed tuning entry is absent, start with the exact service name or satellite position and compare it against a current listing for your region.

When a receiver shows several versions of the same name, compare the satellite, provider and service information on each result. Standard-definition, HD and regional feeds may be separate services. Keep the existing entry until you have confirmed which version is available, and use the access note to determine whether a subscription is required.

Checking the receiver result

A signal strength reading can indicate that the receiver sees power or energy at its input. Signal quality is the more useful reading for confirming that it can lock to the selected carrier. If quality stays at zero, check the satellite selection, the LNB settings and the switch port. If several known active carriers also fail, inspect alignment and cabling before changing individual channel entries.

After the receiver locks, run a manual transponder scan and review the results by service name. Check the scan filter if the expected service is missing. A free-to-air-only filter can exclude encrypted services from the results. Save a working channel only after confirming that it matches the intended service, especially if the receiver already holds several similarly named entries.

Frequently asked questions

Which settings should I use for De Película Plus?

Confirm the exact name and look for a current carrier listing that includes the satellite, frequency, polarity and symbol rate. Enter all four details from the same listing.

Why does a scan show signal but no picture?

Check whether the receiver actually has signal quality and carrier lock. If it does, verify that the service is still in the scanned package and that the receiver supports its video format and access requirements.

Will the same settings work in every location?

Reception depends on the satellite beam and the dish setup at your location. Compare the listed beam with your region, and use a known active transponder on the same satellite to check reception.