DTHsat updated 13-11-2026
Al Jazeera Frequency on Hotbird 13 East Satellite KU band LNB TV Channels
Al Jazeera Frequency TP
Al Jazeera Satellite Hotbire 13 E same TP TV Channels Frequency List
Al Jazeera Frequency on Hotbird Satellite 13.0° East TV channels list frequency updated 13-11-2026 LNB Type KU Band
Channel Name |
Frequency |
Polarity |
Symbol Rate |
Freq |
Al Jazeera |
12111 |
V |
27500 |
3/4 |
Al Jazeera Frequency on Hotbird Satellite 13.0° East TV channels list frequency updated 13-11-2026 LNB Type KU Band
Al Jazeera Frequency on Hotbird Satellite 13.0° East TV channels list frequency updated 13-11-2026 LNB Type KU Band
Asiasat 7 Satellite 105.5° East Channels List Strong Frequency TP for Dish Antenna setting C Band LNB Type and KU Band LNB Frequency Channels List Free to Air Free to air Package paid Channels list with full details guide
Telstar-12 Satellite 15.0° West Channels List Strong Frequency TP for Dish Antenna setting LNB Type KU Band Free to Air Channels list with full details guide
Asiasat 5 Satellite 100.5° E Channels List Strong Frequency TP for Dish Antenna setting C Band and KU Band Free to Air Channels list with full details guide
Paksat-1R Satellite 38.0°East Channels List Strong TP Frequency for Dish Antenna setting C Band LNB Type Channel List and KU Band LNB Channel Free to Air FTA Channels list
Al-Yah-1 Satellite AL Yahsat 1 Frequency 52.5°East Channels List with full guide Yahsat List TV Channels Frequency Strong TP dish antenna settings
NNS 12 Satellite 57.0° East Channels List Strong Frequency TP for Dish Antenna setting C Band LNB Type and KU Band LNB Frequency Channels List Free to air Package paid Channels list with full details guide
The table for Al Jazeera TV Channel includes Al Jazeera at 12111 MHz, polarity V, with symbol rate 27500. Read the satellite and access notes alongside that row before entering the settings. The numbers describe one listed carrier and may be shared by several services.
When a receiver shows several versions of the same name, compare the satellite, provider and service information on each result. Standard-definition, HD and regional feeds may be separate services. Keep the existing entry until you have confirmed which version is available, and use the access note to determine whether a subscription is required.
A signal strength reading can indicate that the receiver sees power or energy at its input. Signal quality is the more useful reading for confirming that it can lock to the selected carrier. If quality stays at zero, check the satellite selection, the LNB settings and the switch port. If several known active carriers also fail, inspect alignment and cabling before changing individual channel entries.
After the receiver locks, run a manual transponder scan and review the results by service name. Check the scan filter if the expected service is missing. A free-to-air-only filter can exclude encrypted services from the results. Save a working channel only after confirming that it matches the intended service, especially if the receiver already holds several similarly named entries.
Start with the relevant row in the table. Match the frequency, polarity and symbol rate together and check that your receiver is on the satellite named with the entry.
Check whether the receiver actually has signal quality and carrier lock. If it does, verify that the service is still in the scanned package and that the receiver supports its video format and access requirements.
Reception depends on the satellite beam and the dish setup at your location. Compare the listed beam with your region, and use a known active transponder on the same satellite to check reception.