Yadah TV Channels Frequency
Yadah TV Frequency TP Free to Air
Yadah TV Intelsat 20 Satellite 68.5°E LNB Type KU Band
Yadah TV on Intelsat 20 Satellite 68.5°E LNB Type KU Band Updated 13-11-2026
| Channel Name | Frequency |
Polarity |
Symbol Rate |
FEC |
Yadah TV |
12562 |
H |
30000 |
5/6 |
Yadah TV on Intelsat 20 Satellite 68.5°E LNB Type KU Band Updated 13-11-2026
Yadah TV on Intelsat 36 Satellite 68.5°E LNB Type KU Band Updated 13-11-2026
| Channel Name | Frequency |
Polarity |
Symbol Rate |
FEC |
Yadah TV |
11888 |
V |
30000 |
5/6 |
Yadah TV on Intelsat 36 Satellite 68.5°E LNB Type KU Band Updated 13-11-2026
Satellite-TV Free Satellite TV Channels and paid Frequency list new
Asiasat 7 Sports TV Channels on 7 TV Network on Paksat 1R 38.0° East Satellite Paid TV channels frequency list LNB Type C Band More info
Paksat Satellite Pakistnai TV Channels list Sports, News, Dramas, TV shows and more TV Channels Networks on Paksat 1R 38.0° East Satellite Paid TV channels and free with details frequency list LNB Type C Band and KU Band LNB type HD TV Channels list More info
Al-Yah-1 Satellite AL Yahsat 1 Frequency 52.5° East Channels List with full guide Yahsat List TV Channels Frequency Strong TP dish antenna setting
G Sat 97.3° East Satellite Channels Frequency List FTA LNB type KU Strong TP
Hotbird Satellite Hotbird 13° East Strong TP Frequency for Dish antenna settings TV Channels frequencies List LNB Type KU band HotBird 13.0° East
Galaxy-19 Satellite 97.0°W Strong TP Frequency for Dish antenna settings Channels list frequencies LNB C band and KU band
The table for Yadah TV Channel includes Yadah TV at 12562 MHz, polarity H, with symbol rate 30000. Read the satellite and access notes alongside that row before entering the settings. The numbers describe one listed carrier and may be shared by several services.
When a receiver shows several versions of the same name, compare the satellite, provider and service information on each result. Standard-definition, HD and regional feeds may be separate services. Keep the existing entry until you have confirmed which version is available, and use the access note to determine whether a subscription is required.
A signal strength reading can indicate that the receiver sees power or energy at its input. Signal quality is the more useful reading for confirming that it can lock to the selected carrier. If quality stays at zero, check the satellite selection, the LNB settings and the switch port. If several known active carriers also fail, inspect alignment and cabling before changing individual channel entries.
After the receiver locks, run a manual transponder scan and review the results by service name. Check the scan filter if the expected service is missing. A free-to-air-only filter can exclude encrypted services from the results. Save a working channel only after confirming that it matches the intended service, especially if the receiver already holds several similarly named entries.
Start with the relevant row in the table. Match the frequency, polarity and symbol rate together and check that your receiver is on the satellite named with the entry.
Check whether the receiver actually has signal quality and carrier lock. If it does, verify that the service is still in the scanned package and that the receiver supports its video format and access requirements.
Reception depends on the satellite beam and the dish setup at your location. Compare the listed beam with your region, and use a known active transponder on the same satellite to check reception.